Installation [10/2015 - ]: Procedure
- INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
HINT:
Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
Refer to INITIALIZATION [10/2015 - ]
- Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.NOTE:
- If the mass air flow meter sub-assembly has been struck or dropped, replace it.
- If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.
- Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.
- INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
See step 3
- INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 12 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 12 [08/2016 - 08/2019] , or refer to PROCEDURE - Step 12 [08/2019 - ]
- INSTALL FRONT WIPER MOTOR AND LINK ASSEMBLY
Refer to INSTALLATION [10/2015 - ]
- INSTALL INLET AIR CLEANER ASSEMBLY
See step 6
- INSTALL COOL AIR INTAKE DUCT SEAL
Refer to PROCEDURE - Step 4 [10/2015 - 08/2016] , or refer to PROCEDURE - Step 4 [08/2016 - 08/2019] , or refer to PROCEDURE - Step 4 [08/2019 - ]
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
Refer to INITIALIZATION [10/2015 - ]
- Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.