Inspection [10/2018 - 07/2022]: Procedure
- INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Throttle Body with Motor Assembly)Standard Resistance
Tester Connection Condition Specified Condition 5 (M-) - 6 (M+) 20°C (68°F) 0.3 to 100 Ω If the result is not as specified, replace the throttle body with motor assembly.
- Measure the resistance according to the value(s) in the table below.