Common Specs & Procedures
LC 500h COMMON SPECS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SERVICE DATA [01/2017 - ] | ||
| Torque | TORQUE SPECIFICATIONS [01/2017 - ] | ||
| Axle Nut/Hub Nut | |||
| Front (Hub Bolt) | 80 N.m (816 kgf.cm 59 ft.lbf) | ||
| Rear | 290 N.m (2, 957 kgf.cm 214 ft.lbf) | ||
| Battery | SERVICE DATA [01/2017 - ] | ||
| Brakes | |||
| Bleeding | BLEEDING [01/2017 - ] | ||
| Disc Brakes | SERVICE DATA [01/2017 - 06/2019] or SERVICE DATA [06/2019 - ] for Front, or SERVICE DATA [01/2017 - ] for Rear | ||
| Torque | TORQUE SPECIFICATIONS [01/2017 - 05/2023] or TORQUE SPECIFICATIONS [05/2023 - ] for Front, or TORQUE SPECIFICATIONS [01/2017 - 05/2023] or TORQUE SPECIFICATIONS [05/2023 - ] for Rear | ||
| Charging | |||
| Generator | SERVICE DATA [01/2017 - ] | ||
| Torque | TORQUE SPECIFICATIONS [01/2017 - ] | ||
| Drive Belts | |||
| Adjustment | ON-VEHICLE INSPECTION [01/2017 - ] | ||
| Belt Routing | INSTALLATION [01/2017 - ] | ||
| Engine Cooling | |||
| General Service Specifications | SERVICE DATA [01/2017 - ] | ||
| Radiator Cap Pressure | Standard value; 93 to 123 kPa (1.0 to 1.3 kgf/cm2
, 13.5 to 17.8 psi) (Brand-new cap) Minimum standard value; 79 kPa (0.8 kgf/cm2 , 11.5 psi) (Used cap) |
||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression | ON-VEHICLE INSPECTION [01/2017 - 04/2020], Step 10 , or ON-VEHICLE INSPECTION [04/2020 - ], Step 10 | ||
| Oil Pressure | at idle, 30 kPa (0.3 kgf.cm2,
, 4 psi) or more at 2, 500 RPM, 200 kPa (2.0 kgf.cm2, , 29 psi) or more |
||
| Overhaul | SERVICE DATA [01/2017 - 04/2020] , or SERVICE DATA [04/2020 - ] | ||
| Torque | TORQUE SPECIFICATIONS [01/2017 - 06/2019] , or TORQUE SPECIFICATIONS [06/2019 - 04/2020] , or TORQUE SPECIFICATIONS [04/2020 - 05/2023] or TORQUE SPECIFICATIONS [05/2023 - ] | ||
| Fluid Specifications | See FLUIDS (Specs) under MAINTENANCE. | ||
| Flywheel/Flex Plate (Drive Plate) Torque | 83 N.m (846 kgf.cm, 61 ft.lbf) | ||
| Fuel System | |||
| Pressure Specification | |||
| At Idle | 196 to 833 kPa (2 to 8.5 kgf/cm2 , 28 to 121 psi) | ||
| Remains for 5 minutes after engine has stopped | 98 kPa (1.0 kgf/cm2 , 14 psi) or more | ||
| For high pressure at idle | 1800 to 2800 kPa (18.4 to 28.6 kgf/cm2 , 261 to 406 psi) | ||
| Fuel Pressure Test Procedure | ON-VEHICLE INSPECTION [01/2017 - 05/2023] or ON-VEHICLE INSPECTION [05/2023 - ] | ||
| Fuel Filter Location | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Spark Plug | |||
| Type | DENSO FK20HBR-8 | ||
| Gap | Electrode gap for new spark plug 0.7 to 0.8 mm (0.0276 to 0.0315 in.) Maximum electrode gap for used spark plug 1.1 mm (0.043 in.) |
||
| Torque | 18 N.m (184 kgf.cm, 13 ft.lbf) | ||
| Starting | |||
| Starter | SERVICE DATA [01/2017 - ] | ||
| Torque | N/A | ||
| Wheel Alignment | |||
| Adjustment Specifications | SERVICE DATA [01/2017 - ] | ||
| Torque Specifications | TORQUE SPECIFICATIONS [01/2017 - ] | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 140 N.m (1, 428 kgf.cm 103 ft.lbf) | ||