LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2022 >> LX 600 Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information >> Front Speed Sensor >> Installation [12/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation [12/2021 - ]: Procedure

  1. INSTALL FRONT SPEED SENSOR LH (w/ Active Height Control) 
    NOTE:
    • Keep the tip of the front speed sensor and installation hole free of foreign matter.
    • Firmly insert the front speed sensor body into the steering knuckle before tightening the bolt.
    • After installing the front speed sensor to the steering knuckle, make sure that there is no clearance between the front speed sensor stay and steering knuckle. Also make sure that no foreign matter is stuck between the parts.
    • Do not twist the front speed sensor wire harness when installing it.
    1. GTY1065614Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Connector Bolt

      Bolt A 

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

      Bolt B 

      Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf) 

    2. GTY1067147Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL FRONT SPEED SENSOR LH (w/o Active Height Control) 
    NOTE:
    • Keep the tip of the front speed sensor and installation hole free of foreign matter.
    • Firmly insert the front speed sensor body into the steering knuckle before tightening the bolt.
    • After installing the front speed sensor to the steering knuckle, make sure that there is no clearance between the front speed sensor stay and steering knuckle. Also make sure that no foreign matter is stuck between the parts.
    • Do not twist the front speed sensor wire harness when installing it.
    1. w/ AVS:
      GTY1065923Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1064751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Bolt A 

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

      Bolt B 

      Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf) 

    3. GTY1060003Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL FRONT SPEED SENSOR RH (w/ Active Height Control) 
    NOTE:
    • Keep the tip of the front speed sensor and installation hole free of foreign matter.
    • Firmly insert the front speed sensor body into the steering knuckle before tightening the bolt.
    • After installing the front speed sensor to the steering knuckle, make sure that there is no clearance between the front speed sensor stay and steering knuckle. Also make sure that no foreign matter is stuck between the parts.
    • Do not twist the front speed sensor wire harness when installing it.
    1. GTY1065271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Connector Bolt

      Bolt A 

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

      Bolt B 

      Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf) 

    2. GTY1067138Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL FRONT SPEED SENSOR RH (w/o Active Height Control) 
    NOTE:
    • Keep the tip of the front speed sensor and installation hole free of foreign matter.
    • Firmly insert the front speed sensor body into the steering knuckle before tightening the bolt.
    • After installing the front speed sensor to the steering knuckle, make sure that there is no clearance between the front speed sensor stay and steering knuckle. Also make sure that no foreign matter is stuck between the parts.
    • Do not twist the front speed sensor wire harness when installing it.
    1. w/ AVS:
      GTY1065546Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY1064967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Bolt A 

      Torque: 8.5 N.m (87 kgf/cm, 75 in.lbf) 

      Bolt B 

      Torque: 12.5 N.m (127 kgf/cm, 9 ft.lbf) 

    3. GTY1060002Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSTALL FRONT WHEEL LH 

    Refer to INSTALLATION [12/2021 - ]

  6. INSTALL AIR CLEANER CAP 
  7. CHECK FOR SPEED SENSOR SIGNAL 

    Refer to SIGNAL CHECK [12/2021 - ]