LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2022 >> LX 600 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Accelerator Pedal >> On-Vehicle Inspection [12/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Vehicle Inspection [12/2021 - ]: Procedure

  1. INSPECT ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY 
    1. Warm up the engine.
    2. Turn the A/C switch off.
    3. According to the display on the GTS, read the Data List.

      Powertrain > Engine > Data List 

      Tester Display
      Accelerator Position Sensor No. 1 Voltage
      Accelerator Position Sensor No. 2 Voltage
    4. Read the values displayed on the GTS.

      Standard Voltage

      Tester Display Condition Specified Condition
      Accelerator Position Sensor No. 1 Voltage Accelerator pedal fully released 0.5 to 1.1 V
      Accelerator pedal fully depressed 2.6 to 4.5 V
      Accelerator Position Sensor No. 2 Voltage Accelerator pedal fully released 1.2 to 2.0 V
      Accelerator pedal fully depressed 3.4 to 4.75 V

      If the result is not as specified, check the accelerator pedal (with sensor) rod assembly, wire harness and ECM.

scientia non olet · About LEMON Manuals