Caliper Hardware
| Condition | Code | Procedure |
|---|---|---|
| Bent | A | Require repair or replacement |
| Broken | A | Require repair or replacement |
| Corroded, affecting performance | A | Require repair or replacement |
| Dust boots on slider pin (bolt) missing | C | Require replacement of boots |
| Dust boots on slider pin (bolt) torn | A | Require replacement of boots |
| Missing | C | Require replacement |
| Shim (OE standard) missing | C | Require replacement |
|
NOTE:
Aftermarket shims may be suggested to reduce noise.
|
||
| Shim bent | A | Require removal or replacement |
|
NOTE:
Removal is acceptable if shim is not OEM.
|
||
| Shim out of position | B | Require removal or replacement |
|
NOTE:
Removal is acceptable if shim is not OEM.
|
||
| Shim worn | A | Require removal or replacement |
|
NOTE:
Removal is acceptable if shim is not OEM.
|
||
| Slider pin (bolt) bent | A | Require replacement of slider pin or bolt and lubricants |
| Slider pin (bolt) rust-pitted | A | Require replacement of slider pin or bolt and lubricants |
| Slider pin (bolt) worn | A | Require replacement of slider pin or bolt and lubricants |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |
| Worn, affecting performance | A | Require replacement |