LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2023 >> LS 500 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> Manifold Absolute Pressure Sensor >> Removal [12/2017 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal [12/2017 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 11 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 11 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 11 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 11 [10/2023 - ]

  2. REMOVE RADIATOR COVER PLATE 

    Refer to PROCEDURE - Step 9 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 9 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 9 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 9 [10/2023 - ]

  3. REMOVE UPPER RADIATOR SUPPORT SEAL 

    Refer to PROCEDURE - Step 8 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 8 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 8 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 8 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 8 [10/2023 - ]

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 10 [12/2017 - 09/2018] , or refer to PROCEDURE - Step 10 [09/2018 - 10/2020] , or refer to PROCEDURE - Step 10 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 10 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 10 [10/2023 - ]

  5. REMOVE NO. 1 TURBO PRESSURE SENSOR 
    1. for Bank 1:
      1. Disconnect the No. 1 turbo pressure sensor connector.
        GTY817293Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Disconnect the No. 4 air hose from No. 1 turbo pressure sensor.
      3. Remove the bolt and No. 1 turbo pressure sensor.
    2. for Bank 2:
      1. Disconnect the No. 1 turbo pressure sensor connector.
        GTY836536Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      2. Disconnect the No. 5 air hose from the No. 1 turbo pressure sensor.
      3. Remove the bolt and No. 1 turbo pressure sensor.
  6. REMOVE NO. 3 TURBO PRESSURE SENSOR 
    1. Disconnect the No. 3 turbo pressure sensor connector.
      GTY817292Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and No. 3 turbo pressure sensor.
scientia non olet · About LEMON Manuals