Installation [12/2021 - ]: Procedure
- INSTALL THROTTLE WITH THROTTLE POSITION SENSOR BODY ASSEMBLY
- INSTALL INTERCOOLER ASSEMBLY
Refer to INSTALLATION [12/2021 - ]
- ADD ENGINE COOLANT
Refer to PROCEDURE - Step 3
- INSPECT FOR COOLANT LEAK
Refer to PROCEDURE - Step 3
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the throttle with throttle position sensor body assembly.
- w/ Canister Pump Module: Refer to INITIALIZATION [12/2021 - ]
- w/o Canister Pump Module: Refer to INITIALIZATION [12/2021 - ]
- Perform "Inspection After Repair" after replacing the throttle with throttle position sensor body assembly.