Installation [11/2021 - ]: Procedure
- INSTALL NO. 2 ECM BRACKET
- INSTALL NO. 1 ECM BRACKET
- INSTALL ECM
- Install the ECM with the 2 bolts and nut.
Torque: 8.0 N.m (82 kgf/cm, 71 in.lbf)
NOTE:If the ECM has been struck or dropped, replace it.
- Connect the 3 ECM connectors and rotate the 3 levers to lock them.NOTE:
- When connecting the ECM connectors, make sure that the connecting parts of the ECM connectors are free of dirt, water and other foreign matter.
- Be sure to securely connect the ECM connectors.
- Install the ECM with the 2 bolts and nut.
- INSTALL AIR CLEANER ASSEMBLY WITH AIR CLEANER HOSE
See step 5 - CONNECT NO. 2 VENTILATION HOSE
See step 6 - CONNECT VACUUM HOSE
- INSTALL INLET AIR CLEANER ASSEMBLY
See step 8 - INSTALL RADIATOR UPPER AIR GUIDE PLATE
- INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY
Refer to PROCEDURE - Step 48 - CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Refer to PROCEDURE - Step 5
- VEHICLE IDENTIFICATION NUMBER (VIN) REGISTRATION
Refer to PROCEDURE - Step 1
- UPDATE ECU SECURITY KEY
Refer to UPDATE ECU SECURITY KEY [11/2021 - ]
- PERFORM INITIALIZATION
Refer to WORK PROCEDURE [11/2021 - 03/2023] , or refer to WORK PROCEDURE [03/2023 - 03/2024] , or refer to WORK PROCEDURE [03/2024 - ]
- INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
HINT:
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.