On-Vehicle Inspection [11/2021 - ]: Procedure

INSPECT ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY

Read the values displayed on the GTS.

Powertrain > Engine > Data List

Tester Display
Accelerator Position Sensor No. 1 Voltage
Accelerator Position Sensor No. 2 Voltage

Standard Voltage

GTS Display	Condition	Specified Condition
Accelerator Position Sensor No. 1 Voltage	Accelerator pedal fully released	0.5 to 1.1 V
Accelerator Position Sensor No. 1 Voltage	Accelerator pedal fully depressed	2.6 to 4.5 V
Accelerator Position Sensor No. 2 Voltage	Accelerator pedal fully released	1.2 to 2.0 V
Accelerator Position Sensor No. 2 Voltage	Accelerator pedal fully depressed	3.4 to 4.75 V

If the result is not as specified, check the accelerator pedal (with sensor) rod assembly, wire harness and ECM.