LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2023 >> NX 350 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Stop And Start System Cancel Switch Assembly - Service Information >> Stop And Start System Cancel Switch Assembly >> Inspection [11/2021 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [11/2021 - ]: Procedure

  1. INSPECT ECO RUN CANCEL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY1063668Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Eco Run Cancel Switch (Electric Parking Brake Switch Assembly))

      Standard Resistance

      Tester Connection Switch Condition Specified Condition
      D23-4 (S) - D23-7 (E) Eco run cancel switch (electric parking brake switch assembly) being pushed and held Below 1 Ω
      Eco run cancel switch (electric parking brake switch assembly) not pushed 10 kΩ or higher

      If the result is not as specified, replace the eco run cancel switch (electric parking brake switch assembly).

scientia non olet · About LEMON Manuals