On-Vehicle Inspection [12/2023 - ]: Procedure
- INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
- Warm up the engine.
- Turn the A/C switch off.
- According to the display on the GTS, read the Data List.
Powertrain > Engine > Data List
Tester Display Accelerator Position Sensor No. 1 Voltage % Accelerator Position Sensor No. 2 Voltage % - Read the values displayed on the GTS.
Standard Voltage (Accelerator Position Sensor No. 1 Voltage %)
Accelerator Pedal Condition Specified Condition Released 10 to 22% Depressed 52 to 90% Standard Voltage (Accelerator Position Sensor No. 2 Voltage %)
Accelerator Pedal Condition Specified Condition Released 24 to 40% Depressed 68 to 95% If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.