Installation [12/2021 - ]: Procedure
- INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY NOTE:
- If the intake mass air flow meter sub-assembly has been struck or dropped, replace it.
- If reusing the intake mass air flow meter sub-assembly, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the intake mass air flow meter sub-assembly.
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the intake mass air flow meter sub-assembly.
w/ Canister Pump Module:
Refer to INITIALIZATION [12/2021 - ]
w/o Canister Pump Module:
Refer to INITIALIZATION [12/2021 - ]
- Perform "Inspection After Repair" after replacing the intake mass air flow meter sub-assembly.