How To Proceed With Troubleshooting [09/2023 - ]: Procedure

Result

Result: 

NEXT 

See step  2

Standard voltage

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

Result

Result: 

NEXT 

See step  3

1. Use the GTS to check if the CAN communication system is functioning normally.

   Refer to DIAGNOSIS SYSTEM [09/2023 - ]

   Result

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM (HOW TO PROCEED WITH TROUBLESHOOTING). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2023 - ] 

Result: 

A 

See step  4

1. Check for DTCs.

   Chassis > Four Wheel Drive > Trouble Codes 

2. Check for freeze frame data.

   HINT: 

   Record or print DTCs and freeze frame data if necessary.

3. Clear the DTCs and freeze frame data.

   Chassis > Four Wheel Drive > Clear DTCs 

4. Recheck for DTCs.

   Chassis > Four Wheel Drive > Trouble Codes 

   Result

   Result	Proceed to
   DTC does not reoccur	A
   DTC reoccur	B

Result: 

B 

See step  8

Result: 

A 

See step  5

1. Use the GTS to check the vehicle control history.

   Refer to VEHICLE CONTROL HISTORY (RoB) [09/2023 - ]

   Chassis > Four Wheel Drive > Utility 

   Tester Display
   Vehicle Control History (RoB)

   Result

   Result	Proceed to
   Vehicle control history is not output	A
   Vehicle control history is output	B

Result: 

B 

GO TO VEHICLE CONTROL HISTORY. Refer to  VEHICLE CONTROL HISTORY (RoB) [09/2023 - ] 

Result: 

A 

See step  6

1. Refer to Problem Symptoms Table.

   Refer to PROBLEM SYMPTOMS TABLE [09/2023 - ] 

   Result

   Result	Proceed to
   Fault not listed in problem symptoms table	A
   Fault listed in problem symptoms table	B

Result: 

B 

See step  8

Result: 

A 

See step  7

1. Terminals of ECU.

   Refer to TERMINALS OF ECU [09/2023 - ] 

2. Data List / Active Test.

   Refer to DATA LIST / ACTIVE TEST [09/2023 - ] 

   Result

   Proceed to
   NEXT

Result: 

NEXT 

See step  8

Result

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

END