LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2024 >> TX 350 Base, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Stop And Start System Cancel Switch Assembly - Service Information >> Stop And Start System Cancel Switch Assembly >> Inspection [09/2023 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [09/2023 - ]: Procedure

  1. INSPECT ECO RUN CANCEL SWITCH (ELECTRIC PARKING BRAKE SWITCH ASSEMBLY) 
    1. Inspect the eco run cancel switch (electric parking brake switch assembly):
      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection Condition Specified Condition
        6 (S) - 7 (E) Eco run cancel switch (electric parking brake switch assembly) being pushed and held Below 50 Ω
        Eco run cancel switch (electric parking brake switch assembly) not pushed 10 kΩ or higher
        GTY1239436Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
        *a Component without harness connected
        (Eco Run Cancel Switch (Electric Parking Brake Switch Assembly))

        If the result is not as specified, replace the eco run cancel switch (electric parking brake switch assembly).

scientia non olet · About LEMON Manuals