Disassembly (Main Body)
- DO NOT remove venturi's from main body. Remove coasting richer solenoid valve and "O" ring. See Figure . Remove idle switch and spring. Remove slow fuel-cut solenoid valve, needle valve, spring and gasket. Remove dashpot (M/T).
- Remove accelerator pump plunger and spring assembly. Remove retaining clip, strainer and inlet check ball. Remove outlet check ball plug, outlet check ball and spring.
- Disconnect throttle link, vacuum diaphragm connecting rod and throttle return spring. Remove throttle body-to-main body retaining bolts (one bolt is located inside throttle body). Separate throttle body from main body.