Rear Tilt Motor Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the rear tilt motor connector.
Connect battery positive voltage to rear tilt motor terminal A or B, then verify that the rear tilt motor operate as shown in Fig 1 .

Fig 1: Motor Operation/Connection
Courtesy of MAZDA MOTORS CORP.

If the rear tilt motor does not operate as indicated, replace the rear tilt motor. See Fig 2 .

Fig 2: Inspecting Rear Tilt Motor
Courtesy of MAZDA MOTORS CORP.