Camber and Caster Adjustment
Camber and Caster Adjustment1. Remove the windshield wiper arm (LH).
2. Partially peel back the cowl grille.
3. Jack up the front of the vehicle and support it on safety stands.
4. Remove the mounting rubber nuts.
5. Push the shock absorber and coil spring component downward, and turn the direction indicator to the desired position.
Adjustment value from original position
6. Install the shock absorber and coil spring, then tighten the mounting rubber nuts to the specified torque.
Tightening torque
46.1 - 62.7 Nm (4.71 - 6.39 kgf-m, 34.1 - 46.2 ft-lbf)
7. Install the cowl grille.
8. Install the windshield wiper arm (LH).