LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2019 >> 3 Base, 4D Hatchback, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> On-Board Diagnostic - MAZDA Connect (4 Of 4) >> Diagnostic Assist Function >> Service Information Menu >> How To Install The OM Data Into Vehicle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

How To Install The OM Data Into Vehicle

NOTE: How To Download The OM Data
  1. To obtain OM data, please ask Mazda distributor in your region.
  2. Download the zip file to desktop.
  3. Unzip it and confirm two files, (contents.tar) and (contents.sig).
  4. Copy the two files to the root of USB memory stick.
  5. After installing the owner's manual, jot down the package number for the downloaded owner's manual data to confirm that the installation was completed correctly.
  1. Switch the ignition ON (engine on) and the center display initial screen launches.
    NOTE:
    • Engine on is recommended if possible to avoid battery run out.
    G13196595Courtesy of MAZDA MOTORS CORP.
  2. Insert the USB memory stick to the USB port.
  3. Press the following buttons simultaneously for 3 seconds or more while pressing the VOLUME knob on the commander switch.
    • FAVORITES button
    • ENTERTAINMENT button
    G13196583Courtesy of MAZDA MOTORS CORP.
    G13196584Courtesy of MAZDA MOTORS CORP.
  4. The diagnostic assist function initial screen is displayed on the center display and diagnostic assist function launches.
  5. Select (Device Program Update) on the diagnostic assist function initial screen.
    G13196598Courtesy of MAZDA MOTORS CORP.
  6. Select (Owner's Manual Update) on the Device Update screen.
    G13196599Courtesy of MAZDA MOTORS CORP.
  7. Select (Update) on the pop up screen.
    G13196600Courtesy of MAZDA MOTORS CORP.
  8. Select (Install) on the pop up screen.
    G13196601Courtesy of MAZDA MOTORS CORP.
  9. Wait for approximately 60 seconds until the installation is completed.
    G13196602Courtesy of MAZDA MOTORS CORP.
  10. Installation is completed. Remove the USB memory stick from the USB port.
    NOTE:
    • After completing the installation, the center display screen switches automatically to the Update/Delete Owner's Manual verification screen.
    G13196603Courtesy of MAZDA MOTORS CORP.
  11. Press BACK button and Device Update screen launches.
    G13196599Courtesy of MAZDA MOTORS CORP.
  12. Press BACK button again and the diagnostic assist function initial screen launches.
    G13196598Courtesy of MAZDA MOTORS CORP.
  13. Select (End Diag Mode) on the diagnostic assist function initial screen and wait for 10 seconds or more.
    G13196606Courtesy of MAZDA MOTORS CORP.
  14. The diagnostic assist function ends and the center display initial screen launches.
  15. Select (Information) (Owner's Manual) and confirm OM is displayed on the center display.
  16. Select (Options) on the owner's manual Home screen.
    G13196607Courtesy of MAZDA MOTORS CORP.
  17. Select (Version) on the options screen.
    G13196608Courtesy of MAZDA MOTORS CORP.
  18. Confirm that the file name for the obtained zip file matches the package number.
    G13196609Courtesy of MAZDA MOTORS CORP.