Wheel Alignment Specifications

WARNING: This page is about a different car, the 1983 Plymouth Sapporo, 1983 Plymouth Colt, 1983 Dodge Ram 50, 1983 Dodge Colt, and 1983 Dodge Challenger. However, it is still accessible from the selected car via links, so may be relevant.

WHEEL ALIGNMENT SPECIFICATIONS (COLT)

Application			Specification
Front
Caster (Degrees)			+5/6 +/- 1/3
Camber (Degrees)			1/2 +/- 1/2 (2)
Toe-in (Inches)			Out 5/64 to In 5/32
Toe-Out on Turns (Degrees)
Inner			33 +/- 1 1/2
Outer			29 5/16

WHEEL ALIGNMENT SPECIFICATIONS (COLT & RAM-50 PICKUPS)

Application			Specification
2WD
Caster (Degrees)			2 1/2 +/- 1
Camber (Degrees)			1 +/- 1/2
Toe-in (Inches)			5/64 +/- 5/16
Toe-Out on Turns (Degrees)
Inner			37
Outer			30 1/2
4WD
Caster (Degrees)			2 +/- 1
Camber (Degrees)			1 +/- 1/2
Toe-in (Inches)			5/64 +/- 5/16
Toe-Out on Turns (Degrees)
Inner			30 3/5
Outer			28

WHEEL ALIGNMENT SPECIFICATIONS (CHALLENGER & SAPPORO)

Application

Specification

Caster (Degrees)

2 2/3 +/- 1/2

Camber (Degrees)

1 1/6 +/- 1/2 ⁽¹⁾

Toe-in (Inches)

0 to 9/32

Toe-Out on Turns (Degrees)

Inner

37 +/- 1

Outer

⁽¹⁾	Not adjustable.