No Combustion
- Monitor vehicle's tachometer while cranking engine (at least 250 RPM).
- Check fuel pump operation. See appropriate FUEL PUMP diagnostic chart in SYSTEM/COMP TESTS article. Use DIAGNOSTIC CHARTS DIRECTORY table in SYSTEM/COMP TESTS article to locate chart.
- Perform appropriate INJECTOR MALFUNCTION diagnostic chart in SYSTEM/COMP TESTS article. Use DIAGNOSTIC CHARTS DIRECTORY table in SYSTEM/COMP TESTS article to locate chart.
- Connect inductive timing light to spark plug wire and check for weakness in flash.
- Ensure spark plug wires are within allowable resistance values.
- Check for spark using spark tester.
- For Code 11: Enter self-diagnostic Mode III and retrieve codes. If vehicle will not start, crank engine before entering self-diagnostic Mode III.