Exhaust Gas Temperature Sensor (CALIFORNIA Models Only)
Place exhaust gas temperature sensor in boiling water at 212°F (100°C). Resistance at 212°F (100°C) should be 76,770-93,830 ohms. As temperature increases, sensor resistance should decrease. Check sensor voltage values against values in EXHAUST GAS TEMPERATURE SENSOR VOLTAGE TEST table. Replace sensor if values are not as specified.
EXHAUST GAS TEMPERATURE SENSOR VOLTAGE TEST (1)
| Application | Terminal No. | Volts w/ Closed | Volts w/ Open | ||
|---|---|---|---|---|---|
| NX | 7 | 1.0 or more | 0-1.0 | ||
| Sentra | 7 | 1.0 or more | 0-1.0 | ||
|
|||||