Engine Control Module (ECM) Identification (NTB94-097)
Reference number: NTB94-097
ENGINE CONTROL MODULE (ECM) IDENTIFICATION
TECHNICAL SERVICE BULLETIN
ENGINE CONTROL MODULE (ECM) IDENTIFICATION
Model(s): All AFFECTED VEHICLES Listed Below
Classification: EF & EC94-015
Section: Engine Control System
Bulletin No.: NTB94-097
Date: November 4, 1994
AFFECTED VEHICLES
1993-94 Altima (U13)
1990 Axxess (M11)
1981-84 Maxima (910)
1985-88 Maxima (U11)
1989-94 Maxima (J30)
1995 Maxima (A32)
1991-93 NX 1600 (G,HB13)
1991-93 NX 2000 (G,HB13)
1983.5 Pulsar Turbo (KN12)
1987-90 Pulsar (KN13)
1993-94 Quest (V40)
1987-90 Sentra (B12)
1991-94 Sentra (B13)
1984-86 Sentra (T11)
1987-89 Sentra (T12)
1990-92 Sentra (U12)
1986-88 Stanza Wagon (M10)
1987-94 Truck (D21)
1987-94 Pathfinder (WD21)
1987,88,90 Van (GC22)
1980-83 200SX (S110)
1984-88 200SX (S12)
1989-94 240SX (S13)
1995 240SX (S-14)
1975-78 280Z (S30)
1979-83 280ZX (HLS130)
1981-83 280ZX Turbo (HLS130)
1984-89 300ZX (Z31)
1984-89 300ZX Turbo (Z31)
1984-89 300ZX (Z32)
1984-89 300ZX Turbo (Z32)
1977-80 810
SERVICE INFORMATION
This bulletin contains charts that list the ECM Vendor serial number and cross-references to a Nissan part number. This chart is intended to be used as a reference guide to assure in verifying that a vehicle has the correct ECM installed in it. The parts catalog along with the VIN number and Date of Manufacture should be used to determine the correct part number when ordering a new ECM.
An ECM with a part number with 2371M-***** RE is a replacement ECM and has the same programming as the original. If a vehicle has an ECM with a part number containing "M" and "RE", disregard the "M" and "RE" when using this chart.
On any consult compatible vehicle the ECM part number can be accessed through the CONSULT connector using CONSULT. All vehicles have a label that has the vendor part number on the ECM cover. See Fig 1 .