LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1994 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> Steering >> Steering Column >> Removal & Installation >> Steering Column >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column: Removal

  1. Before proceeding, disarm SRS (if equipped). See DISABLING & ACTIVATING AIR BAG SYSTEM  . Disconnect and shield battery ground cable. Place wheels in straight-ahead position. Remove steering wheel and horn pad. See STEERING WHEEL & HORN PAD  under REMOVAL & INSTALLATION.
  2. Remove lower "U" joint clamp bolt. Remove upper and lower column covers. Disconnect wiring harness connectors to combination switch, ignition switch and spiral cable (if equipped). Remove heater ducts, lower column bracket bolts and floor plate/dust boot bolts.
  3. Using a punch, mark pinion shaft to "U" joint for reassembly reference. Remove upper column bracket bolts. To remove column, carefully pull steering column toward passenger compartment.