LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1995 >> Sentra Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 1.6L >> Engine Sensors & Switches >> Neutral Position Switch System Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Neutral Position Switch System Test

  1. Turn ignition off. Disconnect Neutral position switch harness connector. Connector is located on top of transaxle. Check continuity between Black wire of Neutral position switch harness connector and ground. Continuity should exist. If continuity exists, go to next step. If continuity does not exist, repair open Black wire or connectors.
  2. Turn ignition off. Disconnect ECM harness connector. Check continuity between ECM harness connector terminal No. 22 (Green/Orange wire) and Neutral position switch harness connector. Continuity should exist. If continuity exists, go to next step. If continuity does not exist, repair open Green/Orange wire or connectors.
  3. Check Neutral position switch. See NEUTRAL POSITION  SWITCH. Replace switch if necessary. If switch is okay, disconnect and inspect harness and connector for pushed-out, bent, damaged or corroded terminals. Repair harness or connector as necessary.
scientia non olet · About LEMON Manuals