"Multi Remote ENT"

Turn ignition switch "OFF".

Fig 1: Inspecting CONSULT-II Procedure
Courtesy of NISSAN MOTOR CO., U.S.A.
Connect "CONSULT-II" to the data link connector.
Turn ignition switch "ON".

Fig 2: CONSULT-II Display
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "START".
Touch "SMART ENTRANCE".

Fig 3: CONSULT-II Select System
Courtesy of NISSAN MOTOR CO., U.S.A.
Touch "MULTI REMOTE ENT".

Fig 4: CONSULT-II Select Test Mode
Courtesy of NISSAN MOTOR CO., U.S.A.
Select diagnosis mode.
"DATA MONITOR", "ACTIVE TEST" and "WORK SUPPORT" are available.

Fig 5: CONSULT-II Select Diag Mode

Courtesy of NISSAN MOTOR CO., U.S.A.