Engine Controls - System & Component Testing - 4 CYL & V6: Introduction
NOTE:
Information for Sentra 1.8L, California Clean Air (CA) model is not available from manufacturer.
Before testing separate components or systems, perform procedures in BASIC DIAGNOSTIC PROCEDURES article. Since the introduction of OBD-II, most all computer-controlled and monitored components set a Diagnostic Trouble Code (DTC) if they malfunction. Information for these components is covered in appropriate SELF-DIAGNOSTICS article.
NOTE:
Testing individual components does not isolate a short or open circuit. Perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance, unless stated otherwise in test procedure.