Section 1047 (Automatic Back Door System)
WARNING: This page is about a different car, the 2004 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
- Automatic Back Door System
- Component Parts and Harness Connector Location
- System Description
- Notes
- Operation Description
- Automatic Door Main Switch Operation (Fully Closed --> Fully Open Operation)
- Remote Keyless Entry Operation (Fully Open --> Fully Closed Operation)
- Back Door Handle Switch Operation (Fully Closed --> Fully Open Operation)
- Automatic Door Main Switch Operation (Fully Open --> Fully Closed Operation)
- Back Door Close Switch Operation (Fully Open --> Fully Closed Operation)
- Anti-Pinch Function
- Gas Stay Check
- Warning Functions
- Auto Back Door Operation Enable Conditions
- Control When Handle Pulled When Operating Enable Conditions Not Yet Met
- Control When Operating Enable Conditions No Longer Met
- Warning Chime Active Conditions
- Reverse Conditions
- Schematic
- Wiring Diagram -BL-B/CLOS-
- Terminals and Reference Value for Back Door Control Unit
- Terminals and Reference Value for BCM
- Trouble Diagnosis Procedure
- Diagnosis Chart
- Back Door Power Supply and Ground Circuit Inspection
- Automatic Door Main Switch System Inspection
- Back Door Close Switch System Inspection
- Pinch Strip System Inspection
- Back Door Warning Chime System Inspection
- Half-Latch Switch System Inspection
- Open Switch System Inspection
- Close Switch System Inspection
- Back Door Handle Switch System Inspection
- Cinch Latch Motor System Inspection