Component Inspection

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition switch "OFF".
Disconnect AWD lock switch harness connector.
Operate AWD lock switch and check continuity between AWD lock switch harness connector M55 terminals 1 and 3.

Fig 1: Continuity Chart
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, replace AWD lock switch.

Fig 2: Checking Continuity Between AWD Lock Switch Harness Connector M55 Terminals 1 And 3
Courtesy of NISSAN MOTOR CO., U.S.A.