Check ACC Power Supply Circuit

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

CHECK ACC POWER
With CONSULT-II

Check ACC power ("ACC ON SW") in "DATA MONITOR" mode with CONSULT-II.
- When ignition switch is in "ACC" position
  ACC ON SW: ON
- When ignition switch is in "OFF" position
  ACC ON SW: OFF
  
  Fig 1: CONSULT-II Function Display Data Monitor
  Courtesy of NISSAN MOTOR CO., U.S.A.
Without CONSULT-II

Check voltage between BCM connector and ground.

Fig 2: Terminal Voltage Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Checking Voltage Between BCM Connector And Ground
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG
1. OK: ACC power supply circuit is OK.
2. NG: Check the following.
  - 10A fuse [No. 6, located in fuse block (J/B)]
  - Harness for open or short between BCM and fuse.