Light Warning Chime Does Not Operate

WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.

CHECK WARNING CHIME OPERATION
Check the chime under conditions in exception of headlamp warning chime operation.

Does warning chime sound?
- YES : GO TO 2.
- NO : Go to "ALL WARNINGS ARE NOT OPERATED " or "KEY WARNING CHIME AND LIGHT WARNING CHIME DOES NOT OPERATE (SEAT BELT WARNING CHIME DOES OPERATE) ".
CHECK BCM INPUT SIGNAL
1. Select "BCM" on CONSULT-II.
2. With "DATA MONITOR" of "BUZZER", confirm "TAIL LAMP SW" when the lighting switch is operated.
  - "TAIL LAMP SW ON"
  - When lighting switch is in 1st position : ON
  - When lighting switch is OFF : OFF
  Fig 1: Scan Tool Display "Data Monitor"
  Courtesy of NISSAN MOTOR CO., U.S.A.
OK or NG
- OK : Replace BCM. Refer to "REMOVAL AND INSTALLATION OF BCM ".
- NG : Replace lighting switch. Refer to "LIGHTING AND TURN SIGNAL SWITCH ".