Sensor Status Check
WARNING: This page is about a different car, the 2005 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the rear sonar sensors are properly aligned (bumper is not misaligned, no deformation in sensor mounting area.
- Check that snow, mud, or other foreign objects are not adhering to the rear sonar sensors.
- Check that there is no deformation, scratches, or other damage to the rear sonar sensors.
- Check that water has not accumulated in the rear sonar sensors.
CAUTION:
Use water, cotton swab, or other soft material for cleaning the sensors.
- Check that there are no obstacles within each rear sonar sensor's detection range.REAR SONAR SENSOR DETECTION RANGE
Detection range Rear sonar sensors Approx. 1.8 m (5.9 ft.) maximum - Check that there are no nearby ultrasound sources (such as the sounds of vehicle horns, motorcycle engines, or truck air brakes).
- Check that the vehicle is on a level surface.