Operation Procedure
WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
- Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
- Touch item to be tested, and check operation.
- Touch "START".
- Touch "STOP" while testing to stop the operation.ACTIVE TEST DETAIL
Test item CONSULT-II screen display Description Tail lamp relay output TAIL LAMP Allows tail lamp relay to operate by switching operation ON-OFF at your option. Headlamp relay (HI, LO) output LAMPS Allows headlamp relay (HI, LO) to operate by switching operation (OFF, HI, LO) at your option (Headlamp high beam repeats ON-OFF every 1 second). Front fog lamp relay output Allows fog lamp relay to operate by switching operation ON-OFF at your option.