LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2000 (Front Final Drive) >> Front Final Drive Assembly >> Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the differential gear oil. Refer to "DIFFERENTIAL GEAR OIL ".
  2. Remove the drive shafts from the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
  3. Remove the front crossmember.
  4. Remove the front propeller shaft from the front final drive assembly. Refer to "REMOVAL AND INSTALLATION ".
  5. Disconnect the vent hose from the front final drive assembly.
  6. Support the front final drive assembly using a suitable jack.
  7. Remove the front final drive assembly bolts, then remove the front final drive assembly.
    CAUTION: Support the front final drive assembly while removing using a suitable jack.
    Fig 1: Identifying Front Final Drive Bolts
    G04898683
scientia non olet · About LEMON Manuals