CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

SELF-DIAGNOSTIC RESULT CHECK

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.

Connect to CONSULT-II, and select "BCM" on "SELECT SYSTEM" screen.
Select "BCM" on "SELECT TEST ITEM" screen, and select "SELF-DIAG RESULTS".
Check display content in self-diagnostic results.

CONSULT-II DISPLAY CODE CHART

CONSULT-II display code	Diagnosis item
U1000	INITIAL DIAG
	TRANSMIT DIAG
	ECM
	IPDM E/R
	METER/M&A
	I-KEY

Contents displayed

No malfunction >> Inspection End

Malfunction in CAN communication system >> After printing the monitor items, go to "SYSTEM DESCRIPTION ".