CONFIGURATION : Special Repair Requirement

WARNING: This page is about a different car, the 2011 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

WRITING VEHICLE SPECIFICATION
Perform "WRITE CONFIGURATION" with CONSULT-III.

When writing saved data: GO TO 2

When writing manually: GO TO 3
PERFORM "WRITE CONFIGURATION - CONFIG FILE"
Perform "WRITE CONFIGURATION - Config file" with CONSULT-III.

Work End.

PERFORM "WRITE CONFIGURATION - MANUAL SETTING"

For "WRITE CONFIGURATION - Manual setting", using the following flow chart, identify the correct model and configuration list.

Confirm and/or change setting value for each item according to the configuration list.

Depending on CONSULT-III software version being used, some or all of the write configuration items shown in the following configuration lists may be displayed. If an item does not display on the CONSULT-III "WRITE CONFIGURATION - Manual setting" screen, then it is an auto setting item and it cannot be manually set or changed.

MANUAL SETTING REFERENCE CHART

MANUAL SETTING ITEM
Items	Setting value
KEYLESS	ENTRY WITH↔WITHOUT
I-KEY	WITH↔WITHOUT
AUTO LIGHT	WITH↔WITHOUT
DTRL	WITH↔WITHOUT
THEFT ALARM	WITH↔WITHOUT
ASSIST LAMP TYPE	MODE1↔MODE2
AUTO DOOR UNLOCK TIMING	W/O I-KEY↔W/I-KEY

NOTE: Confirm vehicle model. Refer to "MODEL VARIATION ".

Work End.