LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 2355 (Engine Control System - Introduction) >> Trouble Diagnosis >> Generic Scan Tool (GST) Function >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect GST to data link connector, which is located under LH dash panel near the hood opener handle.
    Fig 1: Locating Data Link Connector
    G04187192Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch ON.
  4. Enter the program according to instruction on the screen or in the operation manual.

    (*: Regarding GST screens in this section, sample screens are shown.)

    Fig 2: GST Sample Screens Display
    G04185019Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Perform each diagnostic service according to each service procedure.

    For further information, see the GST Operation Manual of the tool maker. 

    Fig 3: GST Tool Display -- OBD Functions Screen
    G04185020Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals