LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Brake Control System) >> Abs >> Trouble Diagnosis >> CONSULT-II Functions >> Active Test >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ABS".

    If "ABS" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT "

  2. Touch "ACTIVE TEST".
  3. Test item selection screen is displayed.
  4. Touch necessary test item.
    Fig 1: CONSULT-II SELECT TEST ITEM Display Screen
    G00768771Courtesy of NISSAN MOTOR CO., U.S.A.
  5. With "SELECT TEST SIGNALS" display shown in reverse, touch "START".
  6. "ACTIVE TEST" screen will be displayed, so conduct following test.
scientia non olet · About LEMON Manuals