LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1316 (Navigation System) >> Navigation System >> Example of Symptoms Judged Not Malfunction >> Destination, Passing Points, And Menu Items Cannot Be Selected/Set
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Destination, Passing Points, And Menu Items Cannot Be Selected/Set

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
PROBLEM DIAGNOSIS (DESTINATION, PASSING POINTS AND MENU ITEMS NOT SELECTED)

Symptom Cause Remedy
Destination cannot be set. Destination to be set is on an expressway. Set the destination on an ordinary road.
Passing point is not searched when re-searching the route. The vehicle has already passed the passing point, or the system judged so. To include the passing points that have been passed into the route again, set the route again.
Route information will not be displayed. Route searching has not been done. Set the destination and perform .
Vehicle mark is not on the recommended route. Drive on the recommended route.
Route guide is turned OFF. Turn route guide ON.
Route information is not available on the dark pink route. System is not malfunctioning.
After the route searching, no guide sign will appear as the vehicle goes near the entrance/exit to the toll road. Vehicle mark is not on the recommended route. (On the display, only guide signs related to the recommended route will be shown.) Drive on the recommended route.
Automatic route searching is not possible. Vehicle is driving on a highway (gray route), or no recommended route is available. Drive on a road to be searched. Or research the route manually. In this case, however, the whole route will be searched.
Performed automatic detour search (or detour search). However, the result is the same as that of the previous search. Performed search with every condition considered. However, the result is the same as that of the previous search. System is not malfunctioning.
Passing points cannot be set. More than five passing points were set. Passing points can be set up to five. To stop at more than five points, perform in several steps.
When setting the route, the starting point cannot be selected. The current vehicle location is always set as the starting point of a route. System is not malfunctioning.
Some menu items cannot be selected. The vehicle is being driven. Stop the vehicle at a safe place and then operate the system.