LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - System & Component Testing) >> Miscellaneous Powertrain Control Module Controls >> Brake Light Switch (Rodeo & Rodeo Sport 2.2L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Light Switch (Rodeo & Rodeo Sport 2.2L)

WARNING: This page is about a different car, the 2002 Isuzu Trooper, 2002 Isuzu Rodeo Sport, 2002 Isuzu Rodeo, 2002 Isuzu Axiom, and 2002 Honda Passport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect brake light switch 2-pin harness connector. Using an ohmmeter, check continuity between brake light switch terminals No. 1 and 4. For terminal identification, see WIRING DIAGRAMS article. Continuity should not be present. Depress brake pedal or actuate brake light switch, continuity should be present. Replace switch if continuity is not as specified.
  2. Check for battery voltage at brake light switch harness connector. If battery voltage is not present, check CB-6 STOP LIGHT (15-amp) fuse in dash fuse box. If fuse is okay, check battery feed wire for an open or short. If problem is found, repair as necessary. After repair, verify brake light operation.
scientia non olet · About LEMON Manuals