Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.

Remove center console. Refer to "REMOVAL ".
Disconnect G sensor harness connector.
Remove G sensor mounting bolts. Then remove G sensor from vehicle.

CAUTION:

Do not drop or strike G sensor, because it has little endurance to impact.
Do not use power tool etc., because G sensor is weak for the impact.

Fig 1: Removing And Installing G Sensor With Torque Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.