Section 1465 (Driver Information System)
WARNING: This page is about a different car, the 2005 Nissan 350Z. However, it is still accessible from the selected car via links, so may be relevant.
- Precautions
- Combination Meters
- System Description
- Component Parts and Harness Connector Location
- Arrangement of Combination Meter
- Schematic
- Wiring Diagram - METER -
- Terminals and Reference Value for Combination Meter
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Self-Diagnosis Mode of Combination Meter
- CONSULT-II Function (METER A/C AMP)
- Trouble Diagnosis
- Symptom Chart 1
- Symptom Chart 2
- Power Supply and Ground Circuit Inspection
- Vehicle Speed Signal Inspection
- Engine Speed Signal Inspection
- Engine Coolant Temperature Signal Inspection
- Fuel Level Sensor Signal Inspection
- Illumination Control Switch Inspection
- Fuel Gauge Pointer Fluctuates, Indicator Wrong Value or Varies
- Fuel Gauge Does Not Move to FULL Position
- Electrical Components Inspection
- Removal and Installation for Combination Meter
- Disassembly and Assembly for Combination Meter
- Triple Meters
- System Description
- Triple Meter
- Power Supply And Ground Circuit
- Trip Computer
- Function
- Vehicle Speed Indication
- Ambient Air Temperature Indication
- DTE (Distance to Empty) Indication
- Average Fuel Consumption Indication
- Average Vehicle Speed Indication
- Trip Time Indication
- Trip Distance Indication
- Stopwatch Indication
- Tire Pressure Indication
- Shift-up Indicator Setting Indication
- How to Change/ Reset Indication
- Oil Pressure Gauge
- Voltmeter
- Schematic
- Wiring Diagram - 3METER -
- Terminals and Reference Value for Triple Meter
- Terminals and Reference Value for Combination Meter
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Self-Diagnosis Mode of Triple Meter
- CONSULT-II Function (METER A/C AMP)
- Trouble Diagnosis
- Symptom Chart 1
- Symptom Chart 2
- Power Supply and Ground Circuit Inspection
- Vehicle Speed Signal Inspection
- Fuel Consumption Monitor Signal Inspection
- Oil Pressure Sensor Inspection
- Trip Computer Switch Inspection
- Removal and Installation of Triple Meters
- Disassembly and Assembly for Triple Meters
- System Description
- Unified Meter And A/C Amp
- System Description
- CAN Communication System Description
- CAN Communication Unit
- Schematic
- CONSULT-II Function (METER A/C AMP)
- DTC [U1000] CAN Communication Circuit
- DTC [B2201] Triple Meter Communication Circuit
- DTC [B2202] Meter Communication Circuit
- DTC [B2205] Vehicle Speed Circuit
- Removal and Installation of Unified Meter and A/C Amp.
- Warning Lamps
- A/T Indicator
- Warning Chime
- System Description
- Component Parts and Harness Connector Location
- CAN Communication System Description
- CAN Communication Unit
- Schematic
- Wiring Diagram - CHIME -
- Terminals and Reference Value for BCM
- Terminals and Reference Value for Unified Meter and A/C Amp.
- Terminals and Reference Value for Combination Meter
- Trouble Diagnosis
- CONSULT-II Function (METER A/C AMP)
- CONSULT-II Function (BCM)
- All Warnings Are Not Operated
- Key Warning Chime and Light Warning Chime Does Not Operate (Seat Belt Warning Chime Does Operate)
- Key Warning Chime Does Not Operate
- Light Warning Chime Does Not Operate
- Seat Belt Warning Chime Does Not Operate