LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1515 (Brake Control System) >> Brake Control System - Abs >> Trouble Diagnosis >> CONSULT-II Function (ABS) >> Active Test >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the CONSULT-II and CONSULT-II CONVERTER to the data link connector and start the engine.
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.
  2. Touch "START (NISSAN BASED VHCL)" on the display screen.
  3. Touch "ABS".

    If "ABS" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

  4. Touch "ACTIVE TEST".
  5. The SELECT TEST ITEM screen is displayed.
  6. Touch necessary test item.
    Fig 1: CONSULT-II Display - ACTIVE TEST
    G03609065Courtesy of NISSAN MOTOR CO., U.S.A.
  7. With the "MAIN SIGNALS" display selected, touch "START".
  8. The Active Test screen will be displayed, so conduct the following test.
scientia non olet · About LEMON Manuals