LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2000 (Front Final Drive) >> Front Final Drive Assembly >> Disassembly and Assembly >> Assembly >> Differential side shaft
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Differential side shaft

WARNING: This page is about a different car, the 2007 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press differential side shaft bearing to differential side shaft.
    CAUTION: Do not reuse differential side shaft bearing.
    Fig 1: Pressing Differential Side Shaft Bearing To Side Shaft
    G04898747
  2. Install snap ring (differential side shaft side).
  3. Install differential side shaft assembly into gear carrier.
  4. Install snap ring (hole side).
  5. Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new side oil seal. Then drive the new side oil seal in evenly until it becomes flush with the gear carrier using Tools.

    Tool number A: ST30720000 (J-25405) 

    B: ST27863000 ( - ) 

    CAUTION:
    • Do not reuse side oil seal.
    • Do not incline the new side oil seal when installing.
    • Apply multi-purpose grease to the lips and differential gear oil to the circumference of the new side oil seal.
      Fig 2: Tapping Side Oil Seal
      G04898748
scientia non olet · About LEMON Manuals