All Warning Chimes Do Not Operate
WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CHIME OPERATION
Select "BUZZER" on CONSULT-III, and perform "LIGHT WARN ALM", "IGN KEY WARN ALM", OR "SEAT BELT WARN TEST" active test.
Does chime sound?
YES: Replace the BCM. Refer to "BCM ".
NO: GO TO 2.
- CHECK UNIFIED METER AND A/C AMP. INPUT SIGNAL
Select "METER A/C AMP" on CONSULT-III. Observe "BUZZER" of data monitor while operating switches in order to meet the requirements to sound warning chime.
When requirements are met to: BUZZER ON sound warning chime
Except above: BUZZER OFF
OK or NG
OK: Replace the combination meter. Refer to "COMBINATION METER ".
NG: Replace the BCM. Refer to "BCM ".