Check Rear Door Switch

With CONSULT-II 

Check rear door switch ("DOOR SW-RR" and "DOOR SW-RL") in "DATA MONITOR" mode with CONSULT-II.

Fig 1: Checking Rear Door Switch Input Signal With CONSULT-II (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Checking Rear Door Switch Input Signal With CONSULT-II (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II 

Check front door switch in "SWITCH MONITOR" mode. Refer to SWITCH MONITOR  .

OK or NG 

1. OK: Rear door switch is OK.
2. NG: GO TO 2.

1. Turn ignition switch OFF.
2. Disconnect door switch and BCM connector.
3. Check continuity between rear door switch connector D62 (rear LH), D82 (rear RH) terminal 1 (W) and BCM connector B4, M4 terminal 33 (W), 143 (W/L).
   Fig 3: Checking Door Switch

   Courtesy of NISSAN MOTOR CO., U.S.A.

   Rear door switch LH 

   1 (W) - 33 (W): Continuity should exist. 

   Rear door switch RH 

   1 (W) - 143 (W/L): Continuity should exist. 

4. Check continuity between rear door switch connector D62 (rear LH), D82 (rear RH) terminal 1 (W) and ground. See Fig 3 .

   1 (W) - Ground: Continuity should not exist. 

OK or NG 

1. OK: GO TO 3.
2. NG: Repair or replace harness.

1. Turn ignition switch OFF.
2. Disconnect rear door switch and BCM connector.
3. Check continuity between rear door switch connector D62 (rear LH), D82 (rear RH) terminal 2 (B) and ground.

   2 (B) - Ground: Continuity should exist. 

   Fig 4: Checking Rear Door Switch Ground Circuit

   Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK: GO TO 4.
2. NG: Repair or replace harness.

Check continuity between rear door switch connector D62 (rear LH), D82 (rear RH) terminals 1 and 2.

Fig 5: Checking Rear Door Switch (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 6: Checking Rear Door Switch (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG 

1. OK: Rear door switch is OK.
2. NG: Replace malfunction door lock assembly rear (door switch).