CAN Communication Inspection Using CONSULT-II (Self-Diagnosis)

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.

CHECK SELF-DIAGNOSTIC RESULT
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
1. Connect to CONSULT-II, and select BCM" on SELECT SYSTEM" screen.
2. Select BCM control unit" on SELECT WORK ITEM" screen, and select SELF-DIAG RESULTS.
3. Check display content in self-diagnostic results.
  
  Fig 1: Displaying Code Diagnosis Item Table
  Courtesy of NISSAN MOTOR CO., U.S.A.
Contents displayed

No malfunction: INSPECTION END

Malfunction in CAN communication system: After printing the monitor items, go to CAN System. Refer to PRECAUTIONS WHEN USING CONSULT-II .