Basic Inspection 3 Abs Warning Lamp Inspection
WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- Check that ABS warning lamp turned on approximately 2 second when ignition switch is turned ON.
Check CAN communications. Refer to "INSPECTION 4 CAN COMMUNICATION LINES ". If there are no errors with CAN communication system, check ABS warning lamp and combination meter. Refer to "COMBINATION METERS ".
- Check that ABS warning lamp turned OFF approximately 2 second after ignition switch is turned on. If ABS warning lamp does not turn OFF, perform self-diagnosis.
- Check that ABS warning lamp turns OFF 2 seconds after engine is started. If ABS warning lamp has not turned OFF 10 seconds after engine has been started, perform self-diagnosis of ABS actuator and electric unit (control unit).
- After performing self-diagnosis, be sure to erase the error memory. Refer to "CONSULT-II FUNCTIONS ".