LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1112 (Brake Control System) >> VCD/TCS/Abs >> Trouble Diagnosis >> CONSULT-II Functions >> Active Test >> Test Item
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Item

WARNING: This page is about a different car, the 2004 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Solenoid valve

CAUTION: The example shown is for front right wheel. The procedure for the other wheels is the same as given below.
  1. For ABS solenoid valve, touch "UP", "KEEP", and "DOWN". Then use screen monitor to check that solenoid valve operates as shown in Solenoid Valve Operation Chart. Refer to Fig 2 .
    Fig 1: CONSULT-II ACTIVE TEST Display Screen
    G00768845Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: Solenoid Valve Operation Chart
G00768846Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE:
  • When active test is performed while depressing pedal, pedal depression amount will change, but this is normal.
  • Approximately 10 seconds after operation is begun, "TEST STOP" will be displayed.
  • To perform retest after "TEST STOP" is displayed, touch "BACK" and conduct the test from the Step 6.