Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.

Before installing wheel sensors,
- Inspect wheel sensor assembly and replace if damaged.
- Clean wheel sensor hole and mounting surface with brake cleaner and a lint-free shop rag. Be careful that dirt and debris do not enter the axle.
- Install a new wheel sensor O-ring, then apply a coat of suitable grease to the O-ring and mounting hole. Refer to "RECOMMENDED FLUIDS AND LUBRICANTS ".
Installation is in the reverse order of removal.